Service Rifle - FTR Target - Black Powder Shooting - Victorian Military Accoutrements - Bromley Armaments - Shooting Accessories - nzrifle.com -  WWII Coastal Defence
.....

.....

.....

.....

.....

.....

.....


.....
.....
 NZ Rifle.com_Home
.....
.....
NZ Rifle.com_VMA
.....
.....
NZ Rifle.com_Shooting
.....
.....
NZ Rifle.com_Military_History
.....
.....
Contact Me
.....

 


Last Updated:: 15 December 2013         ***** NEW ***** Sterling SMG Sight Adjusting Tool  

Reproduction Lee Enfield Sight Adjusting Tools New from Bromley Armaments

***

No1 Tool for Short Magazine Lee Enfield MkI (SMLE) No1, MkIII & No2 MkIV Rifle (All Variation )

US$55.00
*** In Stock***
Postage and Packaging World Wide $US13.00
More than one tool please Email Bromley Armaments for quote
NZ Customers Email for quote

Sight Adjusting Tool No1 (Cramp) No1 for Rifle No1 & No2, Lee Enfield
VMA Sight adjusting tools are new made to original specifications specifically for the for the Short Magazine Lee Enfield MkI (SMLE) No1, MkIII & No2 MkIV Rifle (All Variations )
With Excellent workmanship, reverse engineered  from original BSA And Parker Hale tools and milled from solid steel bar to match original World War I & II production and Hot Blued giving a fine finish.  Adjusting screw 1/4" BSF as per the original giving 1/4 turn = 1MOA or 1 inch at 100 yards.

The tools, although more expensive than others listed on Ebay but are exact copies of originals, some of which are scarce and expensive. These tools are suitable for displays, re-enactment and most of all, accurate to use for sight adjustment  on the range, service rifle shoots or long range shoots.
They are fitted on the rifle after removing the nose cap, and remain clamped while adjustments are made. They do not have to be removed between shots. After adjustment they are removed and the nose cap re-fitted.
 
 

No3 Tool for Lee Enfield No4 Rifle

US$55.00
*** In Stock***
Postage and Packaging World Wide $US13.00
More than one tool please Email Bromley Armaments for quote
NZ Customers Email for quote

Sight Adjusting Tool (Cramp) No3 for Rifle No4, Lee Enfield (Jungle Carbine)
VMA Sight adjusting tools are new made to original specifications specifically foe the Lee Enfield No4, Marks 1 &1*, Mark II, No7 and No9 Cadet Trainers.
Excellent workmanship but with the rough welded finish of original World War Two production and Hot Blued giving a fine finish.  Adjusting screw 1/4" BSF as per the original giving 1/4 turn = 1MOA or 1 inch at 100 yards.

Two variations available. First Variation, original army pattern, Second Variation, post war RAF issue with hole in the front bar so that a special screwdriver (free with this tool) to loosen and tighten the adjusting screw locking the forsight blade.
Please state which tool you require. Special screwdriver is available separately and is only included with the second variation tool..

The tools, although more expensive than others listed on Ebay are exact copies of originals, some of which are scarce and expensive. These tools are suitable for displays, re-enactment and most of all, accurate to use for sight adjustment  on the range, service rifle shoots or long range shoots.
Best of all they are fitted on the rifle with no removal of parts, and remain clamped while adjustments are made. They do not have to be removed between shots.
 

 

No4 Tool for Lee Enfield No5 Rifle (Jungle Carbine)
 

         
Sight Adjusting Tool (Cramp) No4 for Rifle No5, (Jungle Carbine.)

VMA Sight adjusting tools are made with Excellent workmanship, reverse engineered  from original tools tools and milled from solid steel bar to match original World War II production and Hot Blued giving a fine finish.  Adjusting screw 1/4" BSF as per the original giving 1/4 turn = 1MOA or 1 inch at 100 yards.

These tools are used by placing over the flash hider and fore sight, They remain clamped while shooting and adjusting the zero
The tools, although more expensive than others listed are exact copies of originals, of which are scarce and expensive. I myself have only ever seen one of which we used to manufacture these tools. These tools are suitable for displays, re-enactment and most of all, accurate to use for sight adjustment  on the range, service rifle shoots.
Best of all they are fitted on the rifle with no removal of parts, and remain clamped while adjustments are made. They do not have to be removed between shots.

Our price reflects the rarity of the original tool and the complicated milling process to make it.
 

US$85.00
*** In Stock***
Postage and Packaging World Wide $US13.00
More than one tool please Email Bromley Armaments for quote
NZ Customers Email for quote

 

*****   NEW  *****

No5 Tool for Sterling SMG

 
Sight Adjusting Tool (Cramp) No5 for the Sterling SMG. L2A1, L2A2 & L2A3, contract models & Original Patchet SMG.
Never Before offered and rarely seen !!!!!! You have never seen one? Well here it is! Only the Brits would go to this kind of trouble to make a sight adjusting tool for a SMG!
The BANZ No5 Sight adjusting tool is, reverse engineered  from original tools tools and milled from solid steel bar to match original Post War production and Hot Blued giving a fine finish.  Adjusting screw 1/4" BSF as per the original giving 1/4 turn = 1MOA or 1 inch at 100 yards.

These tools are used by placing over the flash hider and fore sight, They remain clamped while shooting and adjusting the zero
The tools, although more expensive than others listed are exact copies of originals, of which are scarce and expensive. I myself have only ever seen one of which we used to manufacture these tools. These tools are suitable for displays, re-enactment and most of all, accurate to use for sight adjustment  on the range, service rifle shoots.
Best of all they are fitted on the rifle with no removal of parts, and remain clamped while adjustments are made. They do not have to be removed between shots.

Our price reflects the rarity of the original tool and the complicated milling process to make it.



 

 

US$105.00
*** In Stock***
Postage and Packaging World Wide $US13.00
More than one tool please Email Bromley Armaments for quote
NZ Customers Email for quote

 

Lee Enfield Firing Pin Removal Tool

 


 


 

NOTE: Only BANZ Firing Pin Removal Tool for sale
Sight Adjusting Tool (Cramp) No1 for Rifle No1, MkIII & MkIII* SMLE Lee Enfield
BANZ Firing Pin Removal Tools are reverse engineered  from original tools tools and milled from solid steel bar to match original World War II production and Hot Blued giving a fine finish.  The End prongs are hardened and profiled to match the Firing Pin slots on all latter production firing pins, rifles No1, No4 and No5. Will not fit earlier MLM/MLE or some MkI's and early MkIII's.

Used as shown in the illustrations above. After re-fitting the firing pin you should always adjust the Firing Pin Protrusion and check the Head Space.

Our price reflects the rarity of the original tool and the complicated milling process to make it.

     

US$32.00
*** In Stock***
Postage and Packaging World Wide $US13.00
More than one tool please Email Bromley Armaments for quote
NZ Customers Email for quote

 

Bromley Armaments Sight Adjusting Tool Inventory
Questions welcome, Other adjusting tools, No1 for SMLE, No2 for Enfield P14 are in the process of being made now and will be available soon. US Pattern 17 .30cal tool also in production. No4 tool for No5 Jungle Carbine available and tool for Sterling SMG on the drawing board.
To avoid confusion as to which tool fits which rifle:
Tool No1. - SMLE Mk1, MkIII, III* Mk4 *** In Stock ***
Tool No.2 - Enfield P14 & M17 *** In Production ***
US Enfield  Cal .30 M17 (may be used on P14) *** Production Planned ***
Tool No3. - Lee Enfield Rifle No4 Mk1, No4 Mk1*, No4 Mk2, No7 & No9 *** In Stock ***
Tool No4. - Lee Enfield Rifle No5 Mk1 (Jungle Carbine) *** In Stock ***
Tool No5. - Sterling SMG L2A1, L2A2 & L2A3 *** In Stock ***
 
Bromley Armaments Hydraulic Berdan De-capper      ******** New ********

Hydraulic Berdan Deprimer for depriming military brass.

Military Brass, .303 and 7.62mm can be reloaded, but shooters still throw it away.
You don't need to, reprime it and use it again. Military brass is the best there is available. If you are paying over $1.00 per case for flimsy commercial brass and have that military brass languishing under the reloading bench, then buy a Bromley Arms Berdan Deprimer and reload it.! Save Dollars!

 A brand new Bromley Arms manufactured Hydraulic Berdan de-capping tool for decapping military Berdan crimped brass.
Far easier to use than the Lyman tool with the ability to deprime over 100 cases per hour.
The Bromley Arms decapper can deprime both .303 British and 7.62mm brass. Also has the potential to deprime other calibres.
The Bromley Arms decapper is precision made to the highest engineering standards with all new materials.
 

 I have used this method for years with great cost savings on both .303 and 7.62mm reloading, saving many dollars reloading salvaged brass. I have recently been making 7.62mm service rifle fodder for as little as$0.65 per round and .303 for $0.61 per round using Barnaul Projectiles. You can often buy cheaper projectiles on Ebay. Buy the Bromley Arms Berdan De-primer and I will give you the info on where I get my components.

 The Bromley Arms Berdan De-primer comes with instructions to use and You Tube video details.

Using No126 Primers for .303, and Nato Primers for Australian 7.62mm L2A2 and F4 Cases as well as South African R1M1, and PMP .303 Mk8 Cases.

 US$175.00 plus postage

See YouTube   NZ Enfield

 

Questions or problems regarding this web site should be directed to webmaster@nzrifle.com
Copyright 2006 - 2010 nzrifle.com. All rights reserved.
Last modified: 05/31/13.